HSS circular saw blades

HSS circular saw blades

To be used on cross-cutting machines and sawing machines, manual and automatic.

• HSS-DMo5 (M2): HSS steel composed by wolfram and molybdenum
• HSS-DMo5 + Co 5% (M35, Co 5%): HSS steel composed by wolfram, molybdenum and cobalt

• TiN (Titanium nitride): Ideal to cut lightly-alloyed steel.
• TiCN (Titanium carbide): Ideal to cut medium-alloyed steel, stainless steel, aluminium.
• AlTiN or TiAlN (Titanium - aluminium nitride): Ideal to cut strongly-alloyed steel, stainless steel and cast iron.
• CrN (Chrome nitride): Ideal to cut non-ferrous metals such as brass, copper, bronze, aluminium and their alloys.

Many other coatings available.

HSS type
Diam.	Thickness	Centre bore	Flange	Teeth (commonly used)
160	1,2	32	75	340-200-160-128-110-100-90-80-70-64-56
	1,5	32	75
	2,0	32	75
175	1,2	32	75	360-220-180-140-120-110-100-90-80-70-60
	1,5	32	75
	2,0	32	75
200	1,0	32	100	420-250-200-160-140-130-120-100-90-80-70-60
	1,2	32	100
	1,5/1,6	32	90
	1,8	32	90
	2,0	25,4/32	90
	2,5	32	90
225	1,2	32	100	470-280-220-180-160-140-128-120-100-90-80-70-60
	1,5/1,6	32	90
	1,8	32 / 40	90
	1,9/2,0	32 / 40	90
	2,5	32	90
250	1,0	32	100	520-320-250-200-180-160-140-128-110-100-90-80-66
	1,2	32	100
	1,5/1,6	32	100
	2,0	25,4 / 32 / 40	100
	2,5	25,4 / 32 / 40	100
	3,0	32	100
275	1,2	32	100	340-280-220-200-180-160-140-120-110-96-90-70-60
	1,6	32	100
	2,0	32 / 40	100
	2,5	25,4 / 32 / 40	100
	3,0	32 / 40	100
300	1,6	32 / 40	100	380-300-220-210-180-170-160-140-120-104-90-80-68
	2,0	32 / 40	100
	2,5	32 / 38 / 40	100
	3,0	32 / 40	100
315	1,6	32 / 40	100	400-300-240-220-200-180-160-140-120-110-100-80-70-60
	1,8	40	100
	2,0	32 / 40	100
	2,5	32 / 40	100
	3,0	32 / 40	100
	3,5	32 / 40	100
325	2,0	32 / 40	120	410-320-250-220-200-190-170-150-128-110-100-80-72-64
	2,5	32 / 40	120
	3,0	40	120
350	1,8	32 / 40 / 50	120	440-350-280-240-220-200-180-160-140-120-110-90-80-70-60
	2,0	32 / 40 / 50	120
	2,5	32 / 40 / 50	120
	3,0	32 / 40 / 50	120
	3,5	40	120
370	2,5	40 / 50	120	380-280-260-220-210-190-160-140-120-110-96-80-70-64
	3,0	32 / 40 / 50	120
	3,5	40	120
400	2,2	40 / 50	130 x 2,5	310-280-250-230-200-180-160-140-120-100-90-80-70
	2,5	40 / 50	120
	3,0	40 / 50	120
	3,5	40 / 50	120
	4,0	50	120
425	2,5	40 / 50	120	320-300-260-240-220-190-160-150-130-110-96-84-70
	3,0	40 / 50	120
	3,5	50	120
	4,0	50	120
450	2,5	40 / 50	130	350-320-280-260-230-200-180-160-140-120-100-90-80
	3,0	40 / 50	130
	3,5	40 / 50	130
	4,0	40 / 50	130
500	3,0	40 / 50	130	380-350-310-280-260-220-200-170-160-130-110-100-90
	3,5	40 / 50	130
	4,0	40 / 50	130
	5,0	40 / 50	130
525	3,5	50	140	410-360-330-300-270-230-200-180-164-130-110-104-90
	4,0	50	140
550	3,0	50 / 90 / 140	200 / 225	430-380-340-310-290-250-220-190-170-140-120-110-90
	3,5	50 / 90 / 140	140 / 200 / 225
	4,0	50 / 90 / 140	140 / 200 / 225
	5,0	50 / 90 / 140	140 / 200 / 225
600	3,5	50 / 90 / 140	225	460-420-380-340-320-270-240-210-190-160-130-120-100
	4,0	50 / 90 / 140	200 / 225
	5,0	50 / 90 / 140	200 / 225
620	4,0	140	225	480-430-390-350-320-280-240-220-190-160-140-120-110
	5,0	140	225

 
Pin-holes for all types of cutting machines.

Tooth shape

• BW: used for the cutting of tubes and section bars
• B: used for the cutting of tubes and section bars with very thin thickness
• BR: the best shape to cut tubes on automatic machines
• A: tooth used for small pitches (T < 3mm) or for cutting of brass alloys, jewelery or screw slotting
• AW: it adds to the A shape a chamfer that allows a better crushing of the chip (used in precision mechanics)
• C=HZ: used for the cutting of solid section bars or very thick tubes
• VP: variable pitch, used for the cutting of very irregular sections that cause strong vibrations and cutting noise

Our technical office is at your disposal for any request