HM circular saw blades with wipers for the first wood processing
For the
longitudinal cutting of:
- softwood
- hardwood
- exotic wood
- in boards, timber, resinoids or non-resinoids, sand strata, etc.
Body blades steel
Steel used for the construction of the body blades is hot or cold rolled.
There are two main categories:
- 80CrV2: for medium / high applications with high stress
- 75Cr1: for standard applications
Teeth
The choice of high quality carbide, to be used for cutting different materials, is directed towards various types of quality of micro / fine / medium grain inserts, to ensure greater durability of the circular saw blade, greater resistance to shocks and limited wear of the tooth.
The cutting thickness is increased and radial and tangential angles are accentuated to have a better penetration and a greater dumping of the chip, avoiding the lateral kneading of the body blade.
To be used on multi-ripping or trimming machines:
- Speed of use 60-85 m / s
- High speed cutting feed depends on the number of teeth, the section and the quality of the material to be cut
- From 20 m / min to 130 m / min
- Maximum cutting performance
We produce all sizes, number of teeth and thickness
Diameter: from 30 mm up to 2200 mm
Thickness: from 1 mm up to 15 mm
The following table shows just a few of the most commonly used diameters, number of teeth and thickness
| Type GS |
| Diameter |
ST |
SC |
Teeth + Wipers |
| 200 |
2,8 |
2,0 |
18 + 2 |
| 210 |
3,2 |
2,2 |
20 + 4 |
| 230 |
4,0 |
2,8 |
24 + 3 |
| 250 |
2,8 |
2,0 |
16 + 4 |
| 300 |
3,2 |
2,2 |
24 + 4 |
| 320 |
3,2 |
2,2 |
28 + 6 |
| 350 |
3,8 |
2,5 |
28 + 6 |
| 370 |
3,8 |
2,5 |
28 + 6 |
| 400 |
4,2 |
2,8 |
28 + 6 |
| 415 |
4,2 |
2,8 |
36 + 4 |
| 430 |
4,6 |
3,0 |
44 + 4 |
| 450 |
4,6 |
3,0 |
32 + 8 |
| 470 |
4,6 |
3,0 |
32 + 8 |
| 500 |
5,0 |
3,4 |
40 + 4 |
(ST = cutting thickness, SC = body blade thickness)
Central bore and pin-holes available for all types of machines.
Execution of different sharpening geometries, use of various teeth quality and coatings.
The number of wipers depends on the application.
Our technical office remains at your disposal for every application needs.
